Sticky Plugs
Max Doyle of Hazelton, IA, didn’t like how plugs would roll off his band saw table as he cut them free. To solve this problem, Max uses a piece of painter’s tape over the plug faces.
Then, after he is done cutting the plugs, he peels the tape back and pulls the plugs off as he needs them.
Saving Fence Adjustment
William Aulick of Cincinnati, OH, was changing bits in his router table and needed to keep the same fence setting. To solve this, he registers the fence location with two clamps.
With the bit changed, he can slide the fence back to the clamps and the same position.
