Give a Gift FREE Book
URL:
https://www.woodsmith.com/article/circle-routing-jig/
Share Page:

Circle Routing Jig

By: Erich Lage & Logan Wittmer
Make Perfect Circles at you Router Table

06 06 01 One of my favorite uses for my router table is to cut circles. It may surprise people, but it’s easily done with the jig you see here. The jig is made of plywood and sized to fit your router table. A piece of aluminum has a series of holes sized to fit a pin. The pin becomes a pivot point for your workpiece. A pair of cleats on the ends of the base keep it from sliding side-to-side. 06 06 03 Using the Jig. To use the jig, position it so the edge of the bit to the center of the pivot pin is the desired radius of your circle, then lock your router fence in place. This acts like a stop. Then, slide the base away from the bit and fit your workpiece over the pin. After turning your router on, you can push the base to the fence, engaging the bit in the workpiece. Then, simply spin your workpiece to create the circle.

Published: June 6, 2024
Share Page:
Topics: None

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

SHN_5FreePlans_300x250

WSM Sidebar Ad_PlywoodProjectsSIB

Newsletter Articles